Yaoneng adhesive information
Organic silica gel water, electronic silica gel curing time is how long?
Organic silica gel water is a kind of one - component or two - component silicon adit adhesive, can be cured at room temperature or heating state.It is a widely used electronic adhesive and sealant in the electronic industry and industrial manufacturing.
Often customers to yao neng company ask electronic silica gel, RTV silica gel how long to cure, silica gel how long to dry, because the dry time of silica gel and customer production efficiency is related to the faster silica gel dry, the whole production process will be more efficient.Yao energy company here to answer the curing time of silica gel, I hope to let you understand and understand.Silicone generally have a two-component one-component silicone and silicone, one-component silicone is usually room temperature curing, 25 ℃ average 5 to 15 minutes when dry, dry table is not sticky on the surface of silica gel, this time under the condition of guarantee don't touch the viscose parts, can be the next step of the production process, 2-3 hours early have good adhesive strength, the vibration of the general and handling is not affected,According to the size of the viscose area and humidity and other factors, the silica gel completely dry solid time within 24 to 48 hours.The lower the temperature, the smaller the humidity, the larger the adhesive area, the longer the curing time of silica gel.If you need to test the mechanical and electrical properties of silica gel, it is best to carry out 72 hours after sizing to ensure the complete curing of silica gel.Two-component silica gel should be mixed in accordance with the specified proportion before use and curing, if not in accordance with the above requirements for operation, two-component silica gel will not be cured or curing is not complete.Two-component silica gel can be cured at room temperature or by heating. At room temperature of 25 ° C, it usually takes 0.5 to 3 hours for the table to dry, and it is completely cured in about 6-12 hours.Warming curing method, the silica gel can be heated to 60 to 80 degrees C, generally 0.5 to 2 hours of complete curing.The two-component silica gel should also be fully stirred before mixing before use, so as to make the sediment of the glue itself evenly exist in the colloid.
Shenzhen yiu can science and technology co., LTD., specializing in the production and sales of organic silicone water, one-component silicone, filled a two-component, silica gel, silica gel, silica gel, high temperature silicone, power supply silicone, RTV silicone, etc., product quality reliable, products, environmental protection, can provide free samples for customer service and technical consulting, and related to replace imported silicone products.
The main application fields of Yaoneng organic silica gel water are:Electronic appliances, lighting lighting, LED products, IT products, power equipment, communications equipment, instruments and meters, electric tools, security equipment, digital, auto electronic, military industry, hardware appliances, aerospace, household appliances, household electrical appliances, new energy, intelligent industrial control, electrician electrical, vehicle manufacturing, consumer electronics, medical equipment, etc.
More organic silica gel water, RTV silica gel, encapsulation silica gel, electronic silica gel, power supply silica gel, environmental protection silica gel, thermal conductivity silica gel products related information can be like Yaoneng company consultation or visit the website of Yaoneng company http://www.shbianzhiji.com, we will serve you wholeheartedly.
∷
